Search results

For anyone using Fonic Wash PC for their high pressure soap and pulling straight out of the 5gl. pail, what dilution ratio are you using? I know it makes a difference if using soft water or not. Just looking for general ideas for a starting point. Thanks.

What chemicals are you using for the Low and High pass?

Sorry Coach, can't help you on pricing. My question is why was the wash abandoned?

Assuming the relay that is lit up on the old ACW-4 is the cycle inhibit relay, it is 120v and the CI relay in the Goldline is 24VDC

Looks like an AR pump.

Are you having an issue with the pump or just looking to have a spare? If it's an issue your having, it should be under warranty if it's a new machine.

Roz, thanks for replying back with what the issue was with the problem you were having. So many times on these types of forums, people post of issues they are having and ask for help diagnosing what the problem may be. They get several good replies of possible solutions, then they never comment...

@Knight01 any update on this?

I know you said you have 120V coming in on each line to ground, what voltage do get when you measure across both hot lines?

If that is the case, I would think it has to be something on the low voltage side. Have you unhooked the wires on the 24V side of the transformer and check to see if you get voltage coming out?

I could be wrong, but it looks like the 2 wires feeding the transformer on the primary side are coming from L1 & L3 of the motor contactor, which would be 220V and not 120V. Can you take a pic of inside of the control box of a bay that is working?

@soonermajic had one for sale.

How would Sonny's buying WW positively affect Oasis?

RDM Industrial Electronics | Remanufactured Petroleum Equipment

Any drive time charges?

Bringing this thread back to life. Seeing how it's been almost 2 years and alot has changed, anybody care to share what there rates are? Thanks in advance.

Kleen-Rite Vac Motor Brush Replacement Kits at the Best Prices! Call 800-233-3873! (kleen-ritecorp.com)

Very nice looking wash Dave! What pricing did you decide to go with on the Razor?

Coach, the faster speed is all fine and dandy, as long as you are producing clean vehicles. If you don't, then the quicker time becomes irrelevant when the customer moves to the competition.