Search results

Good eye. Yes, that line runs to an auto drain and then elbows up and connects to the rest of the lines that you see. I'll post a better photo. So I need to disconnect that line from the feed line? Or I guess just turn off that ball valve that is in between? I feel like that ball valve has...

I have 2 autos and a busy SS, but no flojets as they all use motors instead. (JC Setup). Also, my soft touch is a profile so not much air used like a Soft Gloss would. Figured this size would work great, but still can't figure out why it quit after a few hours. I'm afraid to try it again...

The air line is marked with black marker and was connected properly. This was a setup that came with the head installed on the hose from JC, so I hadn't messed with it all. For the stems, I have just been using a large set of Straight channel locks and once they turn slightly, I do the rest...

I've been luck so far for the past 10 years other than the Wild Cherry fiasco. I've heard good things about the Fragramatics brand and will try those next order. I checked the machine today and ran all 3 fragrance lines to the compressor and was able to get decent airflow out of the wand along...

Thanks guys. Being so cold yesterday and following heavy snow then rain, I hoped that it could be frozen and thawing out would help. Another reason I didn't take it apart yesterday. Regarding the plungers, I have been using KR oil based fragrances for years and they work well for me. When I...

Is that the block where the fragrance comes out? That's all I could think of since the air goes directly there. Was going to take it apart, but it was too cold so out of order for now.

I got a complaint today that my Fragrance wasn't working, so I checked and it's doing something I haven't seen. When you select a fragrance, only air comes out from the gun, but also there is air going into the selected fragrance as you see bubbling in the fragrance bottle. Happens to all 3...

So I bought the Harbor Freight air dryer. Finally turned it on yesterday, it worked for 1/2 a day and then no air was going to anything and it shut down my wash. Don't think I did anything wrong since it worked for a bit, have it in by pass mode now. Looks like it's going back and I'll just...

I last considered it when I had my Soft Gloss, but ended up getting the Ryko version as part of a package upgrade. Don't think it should be too hard, just running some lines and making sure you have an open function on your pump stand.

Look at Mr. Foamer, they probably have something you can buy and add.

I used to grease my Baldor motors until I had one fail and when I took it apart, the grease was everywhere as it had no where to go. One less thing on my maintenance list now.

I'm going to get another TF machine soon, so probably going to end up with another Razor, but always good to see what's out there. A this point the Razor Edge is the front runner.

I really expected more, pretty disappointed in what it offers. Especially with the removal of the LumenArch. I initially thought they were trying to compete with Petit, but it doesn't seem that way.

I asked Washworld about it and here is what I was sent: Uses Razor Platform Increased Clearance for Truck Mirrors Vibrant Blue, Rotationally Molded Polyethylene Spray Arch Cover Protective Polyethylene Cross-Link Face Foam for Added Protection Pressure Gauge on Spray Arch VeeJet Nozzles To...

Will do. I did have an issue where it would shut off after running for a few hours, so I had the system cleaned a few years ago. Since then I've been having it cleaned every 2 years, so hopefully that's not the issue.

Good question, I need to check. I've had this wash for almost 10 years now and I feel like it did much better with the floor heat when I first started, but it's been too long to remember for sure. It has the original coolant in it, but I've topped it off with glycol mixed 50% with water...

I see people here that claim floor heat keeps them ice free down to 0 degrees. Mine only keeps it ice free until about 25 degrees. Below that it works, but ice will slowly start to build up and it definitely can't keep up during snow or ice. I'm going to attach multiple photos and hope to get...

If you really want throughput, get a Petit. Costs much more, but it's way faster if getting dual pumps.

It's a short drive being in Nashville, so I plan on going as well.

Kleen Rite also sells parts for them.