Search results

Not sure what you are asking... How is what achieved? Yellow chemical with a blue backlight? It's simply shining through.

Final Shine is yellow, but we are also using a blue LED light behind it for accent, and it looks good. The blue foaming wax would have been one of our standard trifoam waxes, and it does have a carnuba base. That product should foam just as well.

Final Shine is a yellow colored foaming ClearCoat protectant that we use in ColorWave and in foaming arches designed with a polymer to increase the life and shine of the product on the vehicle surface. It's designed to not leave any residual foam on the vehicle, even if present going into the...

The video above is actually our Softgloss MAXX 3. In the following video at 2:17 in, it does show the Softgloss MAXX in our Customer Experience bay using our Final Shine in a ColorWave application and how it rinses. We have several other foaming wax products that should rinse equally well...

How about installing some LED strip lighting on the outside edges of the conveyor rail to illuminate more like a runway light? Should be an easy target for your customers to see and help align properly. Most conveyors have support structures for the top rail that you should be able to strap...

LOL! I hope you do too!!! Thank you for your business, and I hope it works out well for you!

Todd, please reach out to our Marketing team at sales@ryko.com. They should be able to verify if you still have time to get in on the Softgloss fall promotion deal. It is a lot of machine for the money!

As PCI requirements change, processors continue to evolve their software to meet those requirements. Last summer, Authorize.net advised their customers that they were updating their servers to require TLS ver 1.2 to process cards to meet those updated standards. Ryko similarly had to update...

Recommended bay length - 38'. Min recommended is 32'. Recommended bay width - 16'. Min recommended is 14'-6". Recommended bay height is 12'. Min recommended is 11'-4". For the length dimensions, the 38' references an unobstructed bay to allow full machine travel with the arms out. You can...

The Emotion 3 is not a Ryko machine. The Emotion was manufactured by Fia29 in Italy. Although they are no longer in business, I would recommend you reach out to Croma service as several of their employees had originally worked at Fia. They can be reached at service@croma-croma.com

Mac, for the Thrust Pro dryer, it was sold with a couple of different control panel options. If it were connected to a Ryko carwash, we would use the PLC program of the carwash to control it, so it didn't need it's own PLC to operate (in this case, the follower flow-switches, follower drop and...

WashSingh, we don't publish generic dB measurements on the equipment because it can vary significantly by site. Differences in bay height/width, wall coverings, doors and even outside landscaping can significantly alter acoustics at a specific location. Different styles of dryers (on-board, 3...

The Owners manual for the Multi Upgrade coinbox will have the programming instructions. If you shoot me a PM with your email address, I can send you a copy of the instructions. I don't see a way to attach here.

Steve, I tried jumping on your Site Server to check, but was unable to get on. Sounds like you may be using the high pressure at rear. I would suggest changing the setup question "HiPres@Rear?" to "NO" to see if that resolves the issue. You would then be using standard pressure at the rear to...

It sounds like you have a bind in your top brush pivot bearings. Please try turning off the air to the machine, then releasing the pressure at the relief valve at the bottom of the MAC panel. This should drop all air to the machine causing the top brush to drop. Once the air has released, try...

Call Ryko Tech Support at 866-776-1811 and select option 2 for PC product support and they can assist you.

The 2 digit code 07 references a fault indication based on PLC input X66. This input is normally "ON", and if a fault occurs from within the drive, that signal is lost. To determine if it's something within the drive, please look at Delta VFD parameters 73, 74 and 75 as these are where the...

Hello Sooner, I agree with the comments from others. Like Mac on the Istobols, I can answer your questions related to Ryko. 1. Wash quality between 3 and 5 brush models are going to be similar. The 3 brush will typically require a slightly longer track length as it has to travel full length...

For your concerns related to servicing a Ryko Softgloss, they aren't overly complicated to work on. On the older units before the touchscreen interfaces were available, they were challenging because the only way to access information was using the HPP (hand held programmer). Those are...

The code 15 references an error in RykoNet communication where the PLC of the carwash isn't receiving signals from the Site Server or coinbox. Usually this is a loose connection, but it can also indicate poor quality wiring (use Belden #8760), loose wiring, or noise from improper grounding...