Search results

If you can use codes or coupons this is how I do it. If any local group solicits a donation for fundraiser / Auction I donate coupons. Typicaly it's 50, but it's been as many as 500 and I suggest they auction them in groups of 5. The tickets have an expiration of 2 weeks after the event to...

If you have a stand to copy or modify as desired how would a sketch help?

Program makes sense but I am sure thereare towels that never come back, so I don't know what the cost is. I like giving away air fresheners with the top package and since they are custom imprinted with my info it's a custom reminder hanging from the mirror as to where to get the car washed...

Have hd that happen before. Usualy it's something that will burn or melt so MAPP Gas Torch solves the issue.

Accumulation of debris in the venturi. Take ff the Black Plastic thing that the educator screws into. Look thru it and see if there seems to be an accumulation of debris. This can be cleaned with a long wood screw. Debris can restrict the flow causing it to go thru the educator to the...

1. Other compartments would typicaly be used for other servics like wheel cleaner, foam brush soap etc. 2. Replace with a different typem of float valve . Opinions vary on who likes wat best. I have gone to a hydro float Valve. 3. There may be an overflow opening designed to let water escape...

looks like the top bar is also covering something?

Alos check bags for any Holes, even tiny ones.

They can't make cars without air bag, igntion and SUA problems that hurt people and we are going to trust this?

Don't know if it's a religion. Crypto seemed to be the Cheapest and simplest install available.

I would consider how many years / hours the pump has been in service. You may fix one issue only to be confronted by another some years down the road.

This place was built in 1990. Seems like I Change a few ballasts a year - 8 bays - 4 fixtures each.

So, I have to see if the socket typ is made for an easy swap without too much gerry rigging.

So I have to see basicaly if a regular bulb will fit the socket. HMMMMMMMMMM

Found this http://www.ebay.com/itm/T8-R17D-4FT-20W-F48T12-LED-VENDING-FREEZER-COOLER-REPLACEMENT-BULB-CLEAR-LENS-/121693658177 But at $50.00 a copy?

Seems I have an issue. My 4 foot flourescents have R17D sockets like this: http://www.eledlights.com/t8-8foot-led-tube-high-lumen-r17d.html#.Va-j1LN2l-4 I cannot find 4 footers with this end. Anyone have a source?

Since my Tunnels are EE, the light needs to be in the center of the tunnel, so they are on the Ceiling. (If customers were watcing from a Hallway on the DS I would want the lights on that wall so the side they were viewing had good illumination. No photos, and I would expect the photos...

https://www.kleen-ritecorp.com/p-40744-lsi-legacy-surface-mount-led-light.aspx

Been there, done that with a tunnel. Was re doing equip and had 20 year Old 400w MH ceiling fixtures. Had previously used some 320 W Scottsdales in tunnels. Bit the Bullet and bought a couple of 150W LEDs to try them out. In short order all the rest of the 400's were replaced at...