Search results

Thanks my next step is to change the eye with the cable. The lights 0 an 2 are both on on Channel 2008 in the electric box on the gantry. But im thinking mayeb thats because power is ok, but perhaps the data (or whatever its called) cable is bad. So although light 0 is on, since cable is bad...

im out of options, so far changed measurement eyes to brand new eyes, used those eyes on the can, and also changed boom eyes (closer to the exit side), and still getting error 100 sometimes and also asking to Backup. Should I change the measurement eyes to the ones with straight cable rather the...

Here is a short video. As you see the machine know where to stop the rocketpanel and where to start rinse as it goes to back of the car, also no error 100 or 101, that makes me believe its not measurement or can eyes, then it must be countering eyes. Also the on a normal operation, the Backup...

the problem is back (asking for backup, machines goes to end of the tracks, no boom coming down, but no error on the display except for error68) , so far changed measurement eyes and can eyes. I'm now going to clean (open its connection, add dielectric grease) Contouring eyes and see if its...

then why Driver side is good and foamy?

hi there, I had this issue for few years. Changed the foam generator on the top of the machine but still the same. It cant be the air line, because Driver side is foamy and nice, but passage side is watery. Air and Product liens both connect before the foam generator and THEN goes to both sides...

UPDATE; changed the measurement eyes and no more error 100, but then machine asking for backup with no error and going all the way to the other side of the track. Changed the eyes in the cans as well , and its fixed. I supposed to get error 101 when cans eyes bad but they were good in the start...

Thanks Greg, to sum it up, this both issues are related to the measurement eyes which are 7.10 and 12.12 on this pics.

Thanks, wondering whats the eyes inside the can do? Noticed the machine says “backup” although the customer car not even on the treadle yet.

Hello, when you get error 100(see pic) is that due to the eyes in the can loose/bad or also the other eyes (see pic). Thanks

Hello, my carwash is 18 years old. Curtains, selector boxes, heaters etc look old. Do you recommend changing them? Will I get my money back? My other concern is although putting “new” selector boxes is good in theory, but in practice I now need to learn new things and collect spare parts for...

Hi there, our value cards stopped working since last night. It says processing for a long time but not going through. Anyone else with similar issue now? Is it us or their server? Im in Canada and Credit Cards working fine. In cases like this how do you keep your customers happy? I have reset...

Wow these are super cheap thanks so much

Hi all, does it matter if use PNP or NPN turk sensor on the ww2.0 water wizard? i noticed some starts with AP and some with AN. Does it matter? Is there any of the machine prox sensor NPN? Or they are all PNP? Would this prox work everywhere on ww2.0? https://www.turck.ca/en/product/1634818

Update: problem solved: the breakers were loose making the door not stop completely when see an obstruction and keep going down while the machine thinking it is opening like how it supposed to. The machine thinking its opening while it is actually closing, when the door hit the ground, it...

Hello, one of my doors acting up when someone/something goes through it while coming down. It stops but then it starts going down again but this time ignores the limit switch and the motor keeps running although the door is down, to the extend that can explode the springs. Is this a mother...

UPDATE: problem fixed. the wire in the control box was gotten loose out of its contactor.

Hello the middle blower not working do I need a new fan? it seem to be super expensive. is there a part that typically breaks without changing the whole thing?

Thanks guys, yes it has R on it so its not returnable, i changed this head 4 years ago. Im sure the head is good since the valve oring staed fine for a month but vibration was there. Yes ive seen several times when head goes bad, the valve oring keeps busting which means its about time to change...

Update: changed the head and still the same. Changed all the valves to brand new valves and bingo. I totally lost my trust in the test which you blow in it and it should do from one side but not from another side. All the valves seemed ok when I did that but they were all old. its ok I can now...