Search results

midwestsecuritycameras.com I've bought several cameras and other equipment from Galen, very satisfied with it all.

Since it is all functions, you can rule out the motor contactor. When you say you checked out the ultimate timer and it's fine, how did you check it? I'm confused as to why you would have another timer (GS 27) if your using the DX2000 or DX2002 timer.

From reading a post in another thread "bonus time/courtesytime", I believe he has the Ultimate timer from Dixmor.

Bubbles, if your customer was able to switch between functions after the time ran out, your timer is still sending 24v hot to your rotary switch or touchpad.

What dilution ratio are you mixing your 534?

Red, do you run (2) passes of 534? If so, is the first pass stronger or are you running the same ratio on both passes? I'm getting ready to run 534 on my automatic and am curious to what set up is working for others. Thanks! Scott

Kirb, are you talking about the yellow decals that come with a new Mars validator?

Mep, I changed out a viton flojet on my whitewall system Sunday afternoon that had been on right at 3 years. That particular pump had made in USA on the silver label on top, the one I replaced it with (which is also a viton) says made in China on the silver label. I checked the other 4 that I...

A man seeking to join the Bloomfield, New Jersey's Sheriff's Office The Deputy doing the interview says: "Your qualifications all look good, but there is an attitude suitability test that you must take before you can be accepted." Then, sliding a service pistol across the desk, he says: "Take...

Anyone tried the new G57C Kalrez flo jet pump? www.flojet.com -

Randall, did you get the bay fixed? If so, what was the problem?

Do all the other functions work in this particular bay? If they do, energize bay#4, turn swicth to "wash/soap" and check soap solenoid in equipment room for this particular bay to see if your getting 24vac to it. You need to isolate where the problem is, either in the bay meter or in the...

Mike, What happens if some idiot drives off before the wash is complete? I've had that happen a few times at my wash, with the customer not wanting spot-free rinse on their vehicle for some unknown reason. Scott

Jim, you won't find Electrolux in any supply house catalogs. They manufacture house hold vacuums. A few years ago, they started making vac motors for a local car wash manufacture which is on the same footprint as the lamb motor. I always used the lamb motor before with good success, just...

I beg to differ with that. I 've been using vac motors made by Electrolux (made here in Piney Flats, TN) for the last 3 years with great success.

Did either wash have a security system with a motion detector to activate the alarm when they entered the equipment room?

Someone can correct me if I'm wrong, but all the selectivity dial does is adjust the sensitivity of the coins being accepted. If the sensortron is accepting the quarter but not sending a pulse to the timer, I would clean the sensor at the bottom of the acceptor where the quarter comes out...

Briteauto, I don't know if there is a "correct" way. I think it depends on each car washes location and what road grime your trying to clean. I use a high ph first, followed by a low ph pass which works great for me. My friend uses a low ph first, followed by high ph, works great for him. I...

Can anybody answer this question? If I'm going to basicaly spend $250 + more for the Etowah kit, I'd like to know what I'm getting for the extra money. Besides the validator, I've not had any problems with my Rowe changers.

Just exactly what do you get in the Etowah Valley kit that you don't get with the factory Rowe kit?