Search results

I am trying to decide if I need to get the 2500GPD for 2200 GPD membranes to the replace what I have now. What determines the size needed?

If I'm putting 2 at the top that will be in a dual nozzle and then one on each side, should I go with all 15hp motors, or 2 10's on the top?

I have a defective dryer motor on my Thrust Pro and was wondering if anyone that had sourced one before could point me in the right direction? I can't see how the motor actually looks without taking it apart, but have a photo of the specs: Thanks!

I'm one of those owners lol. I don't have Hyperflex on mine, but got FNF and used it rain bar style.

Thanks for the advice. I think I was more worried about floor heat quitting than doors, but either could happen. You will never regret peace of mind. I am going to get the Spectra Ray +, no need for the carriage mounted in that case. Will also get Hyper Flex and use that instead of getting FNF.

I am trying to pick options on a new Razor and was wondering if anyone here as the Spectra Ray + along with the standard Spectra Ray? If I get the wall mounted plus lights, not sure if the on board lights add any enhanced value since I expect the wall lights to cover the whole car. Thoughts...

I've had no issues using the website for refunds. I rarely give them out as I try to offer a wash code for the IBA or give them Coinless credits if SS or vac, but if there is a mistake, I just used the virtual terminal on the website and refund. Yesterday I had a customer that used my Profile...

I'm in the same boat and an thinking about 2 on the top with one on each side using elephant trunks. All 15hp Premier Dryers. Any thoughts would be beneficial.

Mine lasted over 2 years, so not bad I guess. Better design and it would have lasted many more though.

I just swapped the o-rings on mine with the ones purchased from the o-ring store, and leak fixed for now. Just a band-aid though as the teflon ring caused the issue and is still bad. If anyone figures out what size those are, please post here. Thanks!

If only 1, swipe for sure. Not all cards are tap capable and not everyone uses their phones to pay.

I would 100% close the vacs during salt days. I could never understand why vacs were ever installed at the entrance to the bays. Luckily mine are not. During salt days I barely see any vac activity as most just want to wash the salt off, so you will be making 10x more revenue by keeping the...

I use Coinless and have it setup to give 50% extra in credits if you pay monthly. So pay $20, get $30 in credits. Even if you don't do that, customers get 10% back in credits for every dollar spent, so that's a big perk.

It's $30 and takes 2 weeks plus, so just buying the o-rings is so much cheaper. Just need to decide if I need the Teflon rings before I order. I see that those are what seem to ruin the o-rings in the first place.

I read that whole thread when it was posted, told myself you never know when it my affect me. A couple of weeks later and I already forgot about it! Thanks.

Did you order just the o-rings or the white backup o-rings as well? I'm in the same boat and need to rebuild one of mine that just started leaking. Thanks!

I took the below photo last week as I intended to post her and ask if I should be greasing the fittings on these regulators. There are at least 3 on my Razor pump stand. Well today I was searching for a leak and found that water was squirting out of one of the grease fittings. I tightened it...

Their Big Boss Microfiber Towels are folded and will probably fit. I sell them in my large vendor though. For drop shelf I just buy them from Sam's or Costco and fold in 1/3rds. Very easy and works perfectly in the drop shelves.

From what I understood, it's the one right next to the pressure gauge in the photo I posted of the pump.

I was told today that when using high pressure, liquid is coming out of the regulator. I assume that regulator is used to throttle pressure for the medium pressure functions, but I am not sure how it's setup. What would cause it to leak? Bad regulator, or another cause?