Search results

I use both half gallon jugs and also some empty spray bottles. The spray bottles are small and I can keep them away from the heat so they don't melt.

I got it to work last year, but then once it warmed up after a good snow, I didn't switch back and used over half my drum in just 3 days! There are many days that will be above freezing and where it will be very busy, so not switching back is very, very expensive. With your current system, it...

I have been trying to decide what to do with my Foam Brush and then came across this thread. I currently have no weep or changeover system for my FB. I did purchase a 55 gallon drum of anti freeze soap a couple of years ago but it hasn't really helped much since by the time I switch over to...

That behavior is what is supposed to happen when an invalid card is used. There is not enough time to validate, so it starts and once it realizes that the card is invalid, it shuts down. If it does that to valid cards, then maybe there some issue with the reader. If there is no communication...

did you check to make sure that the coil was not the issue? If all lines are clear, then all that is left is to make sure the coil is energizing.

Ghetto Wash, I appreciate the tip. I used that method to clear out the hose, and even thought I was skeptical, it fixed the problem. The hose had looked clear, but I guess there was something in there. A couple of years ago when I first started working on the combo vacs, I would hook all the...

I have a JC Frag/Vac that is giving me fits trying to figure out the issue with it. One of the fragrances is not spraying and I can't figure out why. It is the one all the way to the right, so the bottom coil of the 3. I have tried replacing the coil, switching the coil with the middle...

You are correct. I realized that right after posting and was able to wire it up that day. Thanks.

I have an extra cryptopay swiper and figured why not just use it on a vacuum since I already have it? It is a spare, but I might as well be using it. Does anyone know how to wire it up to the JC timers? I know the power wire, but not sure which wires I tie into for the other two. Thanks.

Did you check the changer to see if there was a $10 bill followed by a $5 bill? Over the past two years I have had 4 people tell me that it took their $10 and all 4 were lying. On two occasions there wasn't even a $10 bill in the changer so that was easy to figure out and on the other two...

Don't buy too many of any new product at first. That way you can see if it sells. I made that mistake with Black Jack and Bug and Tar Remover and they barely sell. I'm lucky if I sell 1 of them a week. I also had bad luck with Rain Vision and Never Fog and also Brillo Pads. So best advice...

check the nozzle in the bay, if it is old and work it can cause a loss of pressure when the trigger is squeezed.

It's your page, can't you just delete the comments?

Israel claims 1,000 acres in West Bank Israel slammed for West Bank land expropriation http://www.cnn.com/2014/09/01/world/meast/mideast-israel-west-bank/index.html?hpt=hp_t1 And you blame them for fighting back? The only way there will ever be peace is if the Palestinians bend over and take...

No, you need to connect the black wire from the liquid solenoid to the black wire on the terminal. There are two black wires coming from the solenoid. One goes to the push button on the handle, the other goes to the terminal strip and connects to a white wire. I just move the black wire from...

Raise your prices, you will not regret it. Then post back here after a month letting us know how nice it is to have the extra income.

Thanks guys. Now if I can just find the time to start removing decals. I have a couple of new decals that have been sitting in a box for almost a year now.

That's great to hear! I'm glad it worked out for you. It is so much better to not have to deal with the PBC if you are not using it. I just wish I had know that before I sent it a couple for repair. Now I have extras since I am pulling them from half the vacs.

I am about to replace some decals. For all those that chimed in on the best way to remove them, what have you found to be the best way to apply the new decal?