Search results

I took the manifold apart yesterday and I found the scrubby pad in the high pressure check valve. I cleaned it out, checked all the low pressure and spot free check valves, and replaced the scrubby pad. There was no scrubby pad left where it should be. The only scrubby I could find was the...

My Razor is acting up and I can't seem to figure it out. The last few days it will periodically quit spraying through the arch. When a customer would call and complain I would go back and watch the camera and it would be doing dry passes on presoak. Today a couple of times it went through...

Soapy I am sorry this has happened. As operators I think we are always fearful of something like this. Thank God you have good insurance!

Ourtown I just bought the same identical compressor from then for a remodel I am doing. The one thing I have noticed is how much quieter it is then my Ingersoll Rands at my other locations. It will be a for a 3/1 with a Razor.

It was 1.50 for 4 minutes before.

The city population is 4800, the county population is 13000. The traffic count in front of the wash is 10,000. The median income for the area is $34,000.

I have been rehabbing a 3-1 I bought from the bank for the last 6 months. The wash has been closed for a couple years, and has been run down for the last five with a very bad reputation. Everyone in town knows it is being rehabbed with a new owner. I have gutted, replaced, and rebuilt...

$1K for auto bay and I put 4 lights per SS bay. I have a total of 31 of them.

One of my bays are 32' and I use 8 total. 4 on each side. Here is a link to the recommended spacing from TSS:https://www.dropbox.com/s/g9urrpqhyw20s32/light_packages.pdf?dl=0 I am currently redoing a 3/1 and I have put them in all my by bays and under my vacuum shelter.

I use these in my washes. https://www.tsscws.com/products/lighting-fixtures/led-waterproof-tubelight/

I change the oil once a year in my SS pumps. The oil out of the first pump was black, what would cause this? The second pump was milky, condensation or does it need a seal kit? The other two were good.

You can do it. I did it and I paid more for the lot. I bought a used machine but business was good and within a year I pulled it and put a brand new Razor in.

It is very frustrating. Don't know of anything else to do and Cryptopay doesn't have an answer. Some people do leave.

I have it on two Wash Selects and fixing to put in on a third. It does not read all cards like stated above. Sometimes a customer might swipe fifteen times before it accepts it or it might not take it at all. I can walk up with my card and try it and it will take it the first time. It seems...

These SS pits are kind of wide and wondering if I can use the fiberglass grating from Kleenrite? They are 42" x 78". I sawed out a recessed lip around the pit for the grate to set down in. What would ya'll recommend?

You need to either replace the coin hopper or the cable that plugs on the hopper. I've only ever had to change the hopper to fix mine. I think the plating comes off the prongs on the back of the hopper causing it to Jackpot.

$2.00 for 3:00 minutes Soon to be open loacation will be $2.50 for 4:00 minutes Vacs, $1 for 3:30 (location 1) Vacs, $2 for 6 minutes (location 2)

Would anyone have some old pulleys they would want to part with or could tell me what pulleys I need. It is for a cat 310 pump. These are the belts that were on them and I would like to stay with them if possible. (2 of the 3 sets of pulleys were good, only need one set for last pump and...

The discharge is 1/4" is that enough to return to the low pressure side or does it need to be 3/8" or 1/2" hose"? Paraplate BR5-2

Mep, should there be a HP check valve at the pump or does it matter?