Search results

People replace handles?

Police have responded professionally - sometimes later than sooner. Chicago cops prioritize more serious crimes but (abbreviated story) when alarm went off and I looked at cameras and saw the guy inside the place I called in Burglary in progress. Police station is 2 blocks from that...

" I would like to request that the government departments " Your local government entities like Police, and inspection services are likely not watching this forum. You will need to contact them directly and have them provide what you need to do to be one of their contractors.

At this point best guess is it jammed due to some residue on the coin that is now on the sensor. Use a Q tip with alchohol to clean the slot. I havealso used a pre moistened widow cleaning cloth and that has worked.

Nothing but potential issues for injury. if you use a motorized version. Similar version here but of course the weight of the cow, lck of fur toget tangled and design probably is safer.

For anyone stating percentages specify if it is SS Only or SS and IBA. I would think due to ticket size IBA would tend higher. Demographics play a huge part.

8500 Lumens each 4 foot fixture. I am only replacing those of my 4 foot fluorescent (HO) fixtures if they are trashed or can't be easily retrofitted for LED Tubes since the retrofit is more economical.

I havv stared useing these. 4 per b bay 2 on each side wall abut 8 feet up each about 2 feet in from the end wall. https://www.1000bulbs.com/product/226417/PLT-90354.html Note Spec total G & G 200W / 24000 Lumens These 260 W / 34000 Lumens

If you vary line speed based on conditions - All this changes. Other issue is lag between bill pay and consumption time. I would due it annually since I would input the payments by category when I made them and just used annual figure from the accounting software.

100' Conveyor does not mean 100" feet of equipment.. In a cold Climate you may need to start 10 feet inside each door. Also dirt conditions can dictate line speed. Had a location with 2 mitter wrap combos with lower details under.. Hung the initial pre soak and soap off the forst unitfrom...

FWIW I attached an inexpensive Vac Claw to the Air Shammee 2 nozzle when it broke. Seems to work great. Waiting for customer feedback. Fixed the trigger gun nozzle and will reinstall if there is negative feedback.

Agree with Greg. For the most part SS equip is made with components that have a life expectancy and can be easily replaced without issue. Spend efforts on cosmetics like FRP on Bay walls and replace Lines, Booms, as needed. Since there are no details concerning Low pressure system it is hard...

See if you can ask a local Gasoline retailer why sales percentage breakdown of Cash / CC is. That may be a good metric for your area.

IMO any damage is minimal and any difference less so. There may be more of an "Impact" Factor If there is space between the tire and roller when they reverse.

Unless he is in your area local cops likely won't do anything. You could try your state attorney General Fraud unit or if mail was used at all Postal Inspector fraud unit.

IMO spot free for a tunnel is a waste of $ because there will likely be moisture trapped in rain Channels and behind moldings and SF won't eliminate issue of spotting from this.

Can't say I know what your issue is but I have 12 in service. * have been in service since I tool over the location 20+ years ago and the other 4 I added to Vacs a few years ago. So far I can't recall one failing. Since I am just outside Chicago the environment is brutal.

I guess f you need to conserve room but I think it more convenient to be able to just walk all the way round the bike and I could see a lot of splash back off the back wall.

Had a contractor do this in a Tunnel after some damage. Been 6 years and so far so good. I know car washes generally drill and use rivets but not sure adhesive is a bad idea.

And dingbats who ill use the wand to tap on the screen.