Search results

I am on my third one in 25 years, and they are cheap, so 8.3 years or whatever before failure. Its no big deal but I thought for the price they were a bargain, they were definitely purchased from a car wash supply I believe it was windtrax or kim supply < I think kleen-rite bought them out, and...

It is B/C Valve. 3108-075-110v 3/4 " slow close solenoid. it says www.bcvalve.com on the box. If you google it, it comes up on manta with the correct address of overland park, KS 66225. It looks like they may no longer be in business. May have purchased from windtrax years ago because it was...

Is B/C valve out of business?

Torch or heat gun, xylol will remove all of the gum < will come off in layers.

What solenoids are best for use with spot free < for water going to the bays. The ones I will be replacing are 3/32, 24v, mopd 200. 1/4 inch. Can't seem to find these exact ones.

Here was the problem, all 3 check valves for the weep were bad, it must have been putting back pressure on the solenoids causing them to buzz like they were, they are fine now but this is one of the first things I checked, when the pumps were running on high pressure there was no back flow...

The PS, SF, TC are coming back at 22.8, 22.8, 23.4v, installed new micron impervitran 100va transformers in all bays in 2014 < the 24v output of the transformers are 25.7, 25.4, 26.2. I would imagine that there is some drop in voltage but what is acceptable?

Using GS-27d, when the spot free is selected the NO weep solenoid buzzes really loud, does not do this on other LP functions, does it on all three bays.

One day I found the dumpster overfilled with boxes I called the state police and started going through the boxes, when the cop got there he helped me go through them, found a name and address, he asked what I wanted, I said an apology and $80.00 for an extra dump since it was just emptied the...

Ever add a foaming agent to your bay wash to get more of a visual effect in the bay? Maybe adding a small amount of Foam brush detergent?

Anyone ever use the pitcrew for carwash waste removal? www.thepit-crew.com

More booms, more problems, there is always going to be tangling problems when you have more than one boom in the center of the bay, if you look how some washes stagger the booms it may give you an idea of what you are in for, there is no easy answer, you just have to try it, do it in one bay and...

So after reading all the posts, I have to laugh cause we all need a place to vent our frustrations and we all seem to have the same problems in the business, also maybe we need to start something like COA Carwash Owners Anonymous where we can all get together and talk about our problems, Like hi...

I installed the double mosmatic z booms < foam brush and high pressure, in 2008 and they are very nice, I have never replaced a seal in them, where as with the single zierden booms that were there for years, I can’t count the times I replaced the cartridge on them before they came out with the...

2507 Meg @ 1200 psi.

What about with supersat products? Don't use them anymore, they have a proprietary manifold that has a check valve with the screen, im sure you know what im talking about. One from the hph and one from the liquid.

And sorry IB but I have drilled holes and it was no problem.

If you cut a notch in the discharge hose it would only stop the solution tank from back flowing into the 5 gallon pail of say wax, ps, tc or whatever. If the hydrominder failed to shut off and the check valve failed it would dilute the 5 gallon pail, am I right on this? Every time I have seen...

I told this guy to look at the autoforum and see what they are talking about, he said he never heard of it. Also said if i make a post stating what you are telling me that there would be many that would agree to disagree. Read the instructions on the .pdf for the 506, im not trying to argue, but...

what do you cut a notch with?, why not just drill a small hole?