Search results

It would seem you could use a low tech solution. Put a few ounces of concentrate in a small container to suck into the hydrominder and put a bucket under the hydrominder to catch the dilution. Suck till gone and see what total volume is in small bucket. That would be the actual dilution for...

I think the longer the drip space the less the issue vis a vis motors sucking in moisture . I was referring more to the Flash Dry where the nozzle is 3-4 Feet from the rinse arch which would put the cooling fan suction end of the motor about 2 feet from the rinse. My Drip space is as short as...

I had Sonny's equip in one place until the roof came down. Have acquired places with Various types of equipment. I was Happy with the Sonny's stuff and impressed by customer service. I have lots of AVW stuff and like the rotational action - quiet of the mitters. AVW also stepped up and...

To Dewey and Wash Me. How far are the blowers from the closest rinse arch?

I may use some of those to put under No Parking Signs people seem to ignore.

If block is hollow I tend to use threaded rod all the way thru the wall with a fender washer on the inside.

My equipment guys say if the motor faces the entrance it sucks in moisture and they have failures in 6 mos to a year even with motors supposedly built for this. Please get back to us in a year and let us know.

FWIW - I use KR Cherry Blossom for FB, KR low PH for Pre soak, orange something for wax, and Kleen white for Engine / wheels / tire. USe their Winter formula for FB. No Gelling issues with those. Did have Gelling with Purple passion and their HP soap. I use the Ultra lean tips except for...

Ditto. Go with an FRP or similar covering.

If you think that si bad, try it with a gas station.

I 2nd MEP's suggestion. If possible a Nut and bolt fix - Stainless if possible will offer a great solution.

Often you can do the same with lost income by choosing a 30-60-90 day exclusion period. If you are out of business for less than the exclusion period they don't pay or if it's longer they don't pay for that period which reduces the premiums since apparently many out of business conditions can...

Note, I was referring to the inlet. Not nozzle direction.

My insurance company handed it over to an accountant as well. They got 3 years of P&Ls, as well as tax returns, and i think Sales tax returns as well. Thank heavens everything is on quickbooks, so that only took a few clicks, Tax returns were in electronic format, and the State has the sales...

Not sure what the benefit is. This Low PH I use in the tunnels and SS for PS and HP https://www.kleen-ritecorp.com/p-29647-5-gallon-triple-foam-low-ph-conditioner-pink.aspx for $87.25 vs the low PH hyper concentrate for $127.13. Both prices are for 5 Gallons total and same recommended dilution.

In bays use their Low PH product for PS and HP. Too many gelling issues with their PS product. Also use Wax, regular and anti freeze foam brush as well as Kleen white wheel, tire engine cleaner.

To each their own. With my rent / mtge service / taxes , insurance etc. running over $15,000 / mo It is something that became really important. I would never predict that my tunnel would be out of business for over a year for any reason.

In the last year or so had about 6 people get their wipers damaged swearing up, down and sideways the wipers were off... until I told them and e-mailed videos showing wipers were on. Still, some claimed they were off. Apparently they were unaware they had rain sensing wipers.

I will PM you. I will disclose at a later date. At this time I will allow them an opportunity to re think their actions and preserve any reputation.

I see the intake faces the exit of the wash. Makes perfect sense. Makes for less moisture to get sucked into the blower. I always wondered why so many washes, including mine have the intake facing the entrance??