Search results

Water has got to the flame chamber. So things are rusted inside it to the extend water has made its way to the fire chamber. Here is a pic. Thanks for the tip Ill look around.

Exactly that $8k USD changes to $12k CAD when it makes it to Canada. These Rinnai ones seem to be a combination of both on-demand heater attached to a circulating tank as you described above.

Thanks is Rinnai CHS 199 100 HIN, a tankless heater with circulating tank? Here is the link to it: https://www.rinnai.us/commercial/product-detail/chs199100hin

Thanks only my soap and wax are hot, plus with hot water goes and sits in the tank before feeds to the pump, I never provide a super hot soap/wax to customers anyway… how do I measure what my gallon per min is? I have 5 wand wash each with a CAT 5CP2120W pump which each is 4gpm. So if all my 5...

Hello Our water heater failed today. It is A O Smith 100 Gallon 199,000 BTU. If I want to replcae it with exact same one its very expensive. The On Demand tankless heaters are alot cheaper. Do you recommend on demand for a carwash? I have a Coleman Hanna Super Savor system which hot water goes...

Well thats not good…although I do have a worn livejoy on the boom for almost 4 years with no problem.

Update: changed the spider insert 2 month ago but its worn out again. Need to figure out whats causing it. Maybe bad bearing. But how do you check? What if I just stop looking at it? Lol whats the worst thing can happen? Like what if there is no spider insert?

UPDATE: Changed the diaphragm which is repair kit part#K201N5E from Motion Canada and its all fixed. there is another kit which also includes spring, plunger and stem. PS: its much easier to replace these parts than changing the entire solenoid valve.

I could change the whole thing although its alot harder than just changing the diaphragm due to the location of these valves at my wash. If you still have the repair kit I'll buy from you.

I believe my problem is different. There is pressure behind the water coming out and it wont stop until I shut down city water or use the Wax function. Its not just the pressure from gravity from the hot-water tank. When it leaks, water comes through the valves when I was checking them as...

Thanks Ill find the repair kit. Its part# K201N5E from GC valve. One thing I noticed is the leaking stops when I use the Wax option. I guess that’s because the water comes from tge hot water tank on Wax and it helps to shut down the valve??

I did open the rinse valve this morning and didnt see anything specific wrong with it other than the diaphram made my hands black so perhaps its worn out. Here is a pic. I do have two types of this stuff inside the valve but none was the exact match. Where do you think I can find it? Locally...

Update: checked a couple of valves on the pump and they looked good. What I noticed while doing that was water was kept coming although the valve under the hot water tank was shut. This water doesn’t stop unless I close the valve on the city line going to the Rinse valves ( previous pics). Next...

Sure this is an easy change I'll check all the 6 valves (inlet and outlet), and change the O ring on them. The water stops when I turn off the City valve. I'll report here if that fixes the issues. Usually if I have a bad valve I loose pressure or get some vibrations. I don't have that. But...

Im not too sure if I have weep line. I know my guns are weeping meaning still water comes when trigger is not pulled on the handle. But dont think I have a weep line. Where the weep line located? Are they on the pump? Like the line goes from the regulator back to the pump in this pic?

Hello, one of our bays has recently started doing this. Water comes out for a while after customer left. It happens some of the time not all the time. Its not spot free water since i checked its ppm otherwise it would be a trash under its valve. Then thought maybe trash under the rinse valve...

Update: this alarm67 happens every time the machine doesnt stop at the home position(rolls few inches back due to slack due to damaged insert). So my guess is replacing the insert will fix alarm67. But pls share your experience with me if you have seen this as well?

Also not sure which one is the boom prox is it one of these?

I just started getting Alarm67 (pic attached), are these related?

Yes I see quite bit of slack on this passenger side which I think is due to worn out lovejoy. The motor/gearbox start rotating the left side coupling, but the right side doesnt start rotating for 1-2 seconds (or meybe less). Ill go ahead and replace it with a new one and report here if it fixed...