Search results

There are (2) RJ45 sockets on the NXT controller boards. Maybe the Cat5 cable connecting the controllers has been disconnected? Or, the cable is broken and needs replacement?

Siemens Logo? They are quite robust and reliable. Have you tried cycling power? P1 is hot. P2 is neutral. I'd disconnect P2 for 10-15 seconds.

This Glycol feeder will provide system pressurization...if you're so inclined.

In Nayax Core These 2 setting must be selected for each VPOS.

You talking to ME? :ROFLMAO:

No disagreement there, 2Biz. I think I read that OurTown is doing a tear-out...so, my post is intended to provide some revisionist theory and concepts. BTW...We recently completed the 4th tear-out and re-pour in 2 years. (Man, I am way too old for these projects.) 😩 OurTown, Welcome to the...

I’ve always used 200’ maximum length of loops – with a 10% variable. This eliminates the need for “balancing valves” But, running all loops to and from the equipment room makes that design quite difficult. Our solution is to install manifolds for every 2 bays…at the entrance or exit apron...

Unfortunately, after a recent Dixmor revision, the Nayax Pulse 1 wire connection to LED6 no longer works. The unchanged LED7 will still work. Like Keno states...This configuration allows the Nayax VPOS to function as the timer for credit transactions and, any existing timer to function for...

Maybe the Paraplate timer’s output is energizing the coil of an isolation relay? With the timer located in the equipment room, the potential for significant voltage drop to the coin box exists. To eliminate this issue, some installations will incorporate a relay between the timer and the rotary...

Are your bay supply lines simply lying on the roof? Exposed to the elements? Some method of protecting them from UV rays and freezing conditions will solve your problem. 4” PVC conduit/DVW piping, painted plywood enclosure, metal duct for example. We fabricate 20ga galvanized ductwork...

The Timemaster needs to be reprogrammed. Press the "Mode" Button... The "A" menu is coins to start Press the "Set" button to change the value from 7 to 14 Press and release the Mode button until the display returns to normal operation.

I've suffered through many a failed rebuild with the 9000, 9100, and the 7000 valves. I tend to give up and just replace them with a Clack. I have never purchased anything from US Water Systems or Chandler Systems Valves, but I do find them interesting. Synergy Plus Twin-Alternating Commercial...

I've used SMC for years...with no issues. Here's one without mounting bracket or gauge. Hard to beat the price! SMC Regulator

My one and only Quest issue... I have to reintroduce myself to the owner/manager every time I deliver their order.

Above the bay delivers product to the gun/brush in about 5 seconds. Here's an example--- foam gun Triple-Double manifold for 4 products, air, and "secret sauce". You can use it for tri-foam, pre-soak, tire cleaner, wax, bug/desalt, etc. Any unused port can be plugged with PP1/4. Here's a...

2Biz, Thanks for the acknowledgement. Here's another way: We’ve used these push-to-connect fittings for many years…for foam gun & brush installations. Manifold 3/8" Plug 1/4" Plug Because we operate in a cold climate, each assembly is installed in the heated plumbing trough, directly above the...

The lowest point of the bay supply hoses will freeze…unless you can figure out a way to evacuate 100% of the residual moisture in the hose. Since liquids always find their own level, the loop will always collect the residual moisture. Air-blow-out alone will only work reliably if the gun or...

Over the years we’ve converted most of our customers to low pressure foaming guns for Pre-soak, Tire, Bug, Desalt, etc. Low pressure products, delivered thru a separate foam gun, has many benefits: Much quicker product delivery to the gun Much better show and coverage for the customer…you...

Me, too. But that's no longer an option. Concerned about the interface relay getting water damaged? If you have 3 spare wires to each coin box and timed output/test switch wire to the equipment room, you could install the relays in the equipment room. The external stop switch wires don’t need...

Why not just let the Nayax serve as the timer for credit users?